Key Products       
Commonly Powder Coating    
Specially Powder Coating    
 
 
 
¡¡HOME > Products-Products
Special Powder Coatings For Aluminum Wheel-Hub
 
Introduction£º
This series of Special Powder Coatings For Aluminum Wheel-Hub is designed by our company for inner wheel-hub protection and surface vanish. It has the features of smooth appearance, strong adhesion and good resistance to salt spray. Our products have been widely adopted in domestic market.
Feature£º It has the fetures of smooth appearance, strong adhesion and good resistance to salt spray.
Uses£º For the purpose of inner wheel-hub protection and surface vanish, this series of Special Powder Coatings For Aluminum Wheel-Hub is specially designed to meet customer's needs ofdifferent products and specialities.
Series of Product£º  
1¡¢Clean Powder Coatings Super-high transparent pure polyester powder coatings(Latest product)
Standard transparent pure polyester power coatings
Transparent pure polyester power coatings
2¡¢Base Powder Pure Polyester Base Powder
Super-high Leveling polyester/Epoxy Mixed Base Powder (Lastest Product)
High Leveling polyester/Epoxy Mixed Base Powder
Low gloss polyester/Epoxy Mixed Base Powder
3¡¢Special Function Products Breathing powder coatings
Electrostatic shield resistance powder coatings
Apply Condition£º This series of Special Powder Coatings For Aluminum Wheel-Hub is designed by our company for inner wheel-hub protection and surface vanish.
Physical Property£º  
S.G 1.2-1.8g/cm3(as per ingredient&color demand)
Granularity distribution average granularity is 35-40¦Ìm,<10¦Ìm powder<10%£¬>90¦Ìm powder<0.5%.
Coating Film Property£º All the tests use 0.8mm deoiling derusting cold-rolled steel sheets, with the film thickness between 50 to 80 ¦Ìm.
P.P. Clean Powder  
Mechanical properties:  
Pencil hardness GB/T 6739-1996 H-2H
Adhesion(cross-cut) GB/T 9286-1998 0 grade
Bend test GB/T 6742-1986 1mm
Impact strength test GB/T 1732-1993 ¡İ50kg.cm
Cupping test GB/T 9753-1988 ¡İ8mm
Corrosion resistance:  
Salt fog test GB/T 1771-1991 No effects, and the corrosion width of cross-cut is smaller than 2mm
Humid heat test GB/T 1740-1979 £¾1000h slight blinding
Weather resistance accelerated light exposure test QUV-B313£¨240h£¬8h/60¡æ lighting£¬4h/50 condensation£©GB/T 14522-1993 Gloss retention rate¡İ80%,no change with color
Base Powder  
Mechanical properties:  
Pencil hardness GB/T 6739-1996 H-2H
Adhesion(cross-cut) GB/T 9286-1998 0 grade
Bend test GB/T 6742-1986 ¡Ü2mm
Impact strength test GB/T 1732-1993 ¡İ50kg.cm
Cupping test GB/T 9753-1988 ¡İ7mm
salt fog test GB/T 1771-1991 £¾500h,No effects, and the corrosion width of cross-cut is smaller than 2mm
Humid heat test GB/T 1740-1979 £¾1000h,slight blinding
Packing£º Double PP bags, N.W 20kg/carton
Shelflife£º 12 months within 30¡æ,avoid direct sunlight.
Health and Safety£º Refer to the MSDS.
Color Table£º
 
   
   
   
[Back]
Contact Us | Link
Tel: +86-20-86985846 ¡¡¡¡ Fax: +86-20-86985709 ¡¡¡¡E-mail: kmcinfo@kinte.com.cn

Add:16# ,YuFeng Road ,Shiling Town ,HuaDu District, Guangzhou City